Part Number Hot Search : 
OM1058 BYM36A CD4038AH TC915IJD E28F640 BC846 16L580IM P06Q002
Product Description
Full Text Search
 

To Download NJU6369XC-D Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 NJU6363 Series
Product Specification
Fundamental Quartz Crystal Oscillator
sGENERAL DESCRIPTION The NJU6363 series is a C-MOS fundamental quartz crystal oscillator that consists of an oscillation amplifier, 3-stage divider and 3-state output buffer. The 3-stage divider generates only one frequency selected of f0,f0/2,f0/4 f0/8, f0/16 and f0/32 by internal circuits is output. The oscillation amplifier is realized very low stand-by current using NAND circuit. The 3-state output buffer is C-MOS compatible. sPACKAGE OUTLINE
NJU6369XC-D
sFEATURES qLow Operating Current 1mA @1.8V qOperating Voltage 1.5 to 3.6V qMaximum Oscillation Frequency 40MHz(T.B.D) @1.5V qHigh Fan-out IOH/IOL= T.B.D @1.8V q3-Stage Divider Maximum Divider f0/32 qOscillation Stop and Output Stand-by Function q3-State Output Buffer qOscillation Capacitors Cg and Cg on-chip qPackage Outline Thin-Chip qC-MOS Technology !LINE-UP TABLE Type No. A B C D E F FOUT f0 f0/2 f0/4 f0/8 f0/16 f0/32 Internal Connect Connected A Line Connected B Line Connected C Line Connected D Line Connected E Line Connected F Line Cg/Cd 23/23pF 23/23pF 23/23pF 23/23pF 23/23pF 23/23pF
sPAD LOCATION
Thin-Chip CONT XT XT VSS VDD FOUT
!COORDINATES No 1 Pad Name X Y
CONT XT
-178 -178 -178
231 77 -77
NJU6363
2 3 4 5 6
XT
VSS FOUT VDD
-178 206 206
-231 -231 231
Starting Point:Chip Center Unit[um] Chip Size:0.7x0.75mm Thin-Chip Thickness(-D):20020um Pad Size:90x90um sBLOCK DIAGRAM
VDD
Rf
XT
1/ 2 1/ 2 1/ 2 1/ 2 1/ 2
XT
VSS
Cg
Cd
A
B
C
D
E
F
3 - STATE BUFFER
FOUT
CONT
2002/03/05 ( 1 / 6 )
NJU6363 Series
sTREMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Control FOUT CONT Output either one frequency selected of f0, CONT H or OPEN f0/2,f0/4,f0/8, f0/16 and f0/32 Note1) L Oscillation Stop and High impedance Output
Quartz Crystal Connecting Terminals XT VSS VSS=0V FOUT Frequency Output VDD VDD=1.8/2.5V/3.3V Note1) Refer to the line-up table.
sABSOLUTE MAXIMUM RATINGS
XT
(Ta=25C) PARAMETER SYMBOL RATING UNIT Supply Voltage VDD -0.5 to +7.0 V Input Voltage VIN VSS-0.5 to VDD+0.5 V Output Voltage VO -0.5 to VDD+0.5 V Input Current IIN mA 10 Output Current IO mA 25 Operating Temperature Range Topr -40 to +85 C Storage Temperature Range Tstg -55 to +125 C Note2) If the supply voltage(VDD) is less than 7.0V, the input voltage must not over the VDD level though 7.0V is limit specified. Note3) Decupling capacitor should be connected between VDD and VSS due to the stabilized operation for the circuit.
2002/03/05 ( 2 / 6 )
NJU6363 Series
sELECTRICAL CHARACTERISTICS
PARAMETER Operating Voltage
SYMBOL VDD
CONDITIONS
MIN 1.5
TYP
(Ta=25C) MAX UNIT 3.6 V (VDD=1.8V,Ta=25C) MAX UNIT 1 1 1 mA 1 1 1 3 1 1.8 0.54 uA uA V V mA mA uA uA uA K pF MHz
PARAMETER
SYMBOL
Operating Current
IDD
CONDITIONS A version,fosc=16MHz,CL=5pF B version,fosc=16MHz,CL=5pF C version,fosc=16MHz,CL=5pF D version,fosc=16MHz,CL=5pF E version,fosc=16MHz,CL=5pF F version,fosc=16MHz,CL=5pF CONT =VSS, No load CONT =XT=VSS, No load Note4)
MIN
TYP
Oscillation Stopping Current Stand-by Current Input Voltage Output Current Input Current 3-state Off Leakage Current Feedback Resistance Internal Capacitor Maximum Oscillation Frequency Output Signal Symmetry Output Signal Rise Time Output Signal Fall Time Output Disable time Output Enable Time Note4)
ISTB Ist VIH VIL IOH IOL IIN IOZ Rf Cg/Cd FMAX SYM tr tf TPLZ TPZL
1 1.26 0 T.B.D T.B.D 3.0 0.5
VOH=1.62V VOL=0.18V CONT =0.8VDD CONT =0.2VDD CONT =VSS, FOUT= VDD or VSS fosc=16MHz
4.5 0.7 0.1
T.B.D T.B.D 40
CL=5pF, @VDD/2 CL=5pF,10% to 90% CL=5pF,90% to 10% CL=5pF,RUP=10k CL=5pF,RUP=10k
45
50 T.B.D T.B.D
55 T.B.D T.B.D 250 250
% ns ns ns ns
Excluding input current on CONT Terminal.
2002/03/05 ( 3 / 6 )
NJU6363 Series
PARAMETER SYMBOL CONDITIONS A version,fosc=16MHz,CL=5pF B version,fosc=16MHz,CL=5pF C version,fosc=16MHz,CL=5pF D version,fosc=16MHz,CL=5pF E version,fosc=16MHz,CL=5pF F version,fosc=16MHz,CL=5pF CONT =VSS, No load CONT =XT=VSS, No load Note4) 1.75 0 T.B.D T.B.D 7.5 1.2 MIN TYP (VDD=2.5V,Ta=25C) MAX UNIT 2 1.5 1 mA 1 1 1 5 1 2.5 0.75 uA uA V V mA mA uA uA uA K pF MHz 50 T.B.D T.B.D 55 T.B.D T.B.D 200 200 % ns ns ns ns
Operating Current
IDD
Oscillation Stopping Current Stand-by Current Input Voltage Output Current Input Current 3-state Off Leakage Current Feedback Resistance Internal Capacitor Maximum Oscillation Frequency Output Signal Symmetry Output Signal Rise Time Output Signal Fall Time Output Disable time Output Enable Time Note4)
ISTB Ist VIH VIL IOH IOL IIN IOZ Rf Cg/Cd FMAX SYM tr tf TPLZ TPZL
2
VOH=2.25V VOL=0.25V CONT =0.8VDD CONT =0.2VDD CONT =VSS, FOUT= VDD or VSS fosc=16MHz
12.0 2.0 0.1
T.B.D T.B.D 40
CL=5pF, @VDD/2 CL=5pF,10% to 90% CL=5pF,90% to 10% CL=5pF,RUP=10k CL=5pF,RUP=10k
45
Excluding input current on CONT Terminal.
2002/03/05 ( 4 / 6 )
NJU6363 Series
PARAMETER SYMBOL CONDITIONS A version,fosc=16MHz,CL=5pF B version,fosc=16MHz,CL=5pF C version,fosc=16MHz,CL=5pF D version,fosc=16MHz,CL=5pF E version,fosc=16MHz,CL=5pF F version,fosc=16MHz,CL=5pF CONT =VSS, No load CONT =XT=VSS, No load Note4) 2.31 0 T.B.D T.B.D 10.0 1.8 MIN (VDD=3.3V,Ta=25C) TYP MAX UNIT 2.5 2 1.5 mA 1.5 1.5 1.5 2 5 1 3.3 0.99 uA uA V V mA mA uA uA uA K pF MHz 50 T.B.D T.B.D 55 T.B.D T.B.D 150 150 % ns ns ns ns
Operating Current
IDD
Oscillation Stopping Current Stand-by Current Input Voltage Output Current Input Current 3-state Off Leakage Current Feedback Resistance Internal Capacitor Maximum Oscillation Frequency Output Signal Symmetry Output Signal Rise Time Output Signal Fall Time Output Disable time Output Enable Time Note4)
ISTB Ist VIH VIL IOH IOL IIN IOZ Rf Cg/Cd FMAX SYM tr tf TPLZ TPZL
VOH=2.97V VOL=0.33V CONT =0.8VDD CONT =0.2VDD CONT =VSS, FOUT= VDD or VSS fosc=16MHz
15.0 3.0 0.1
T.B.D T.B.D 60
CL=5pF, @VDD/2 CL=5pF,10% to 90% CL=5pF,90% to 10% CL=5pF,RUP=10k CL=5pF,RUP=10k
45
Excluding input current on CONT Terminal.
2002/03/05 ( 5 / 6 )
NJU6363 Series
sMEASURMENT CIRCUITS
(1)Output Signal Symmetry(CL=5pF)
Pulse Generator
1000pF XT 50
VDD FOUT CL=5pF H L 1/2VDD
VSS
(2)Output Signal Rise/Fall Time(CL=5pF)
Pulse Generator
1000pF XT 50
VDD FOUT CL=5pF tr tf
90% 50% 10%
VSS
(3)Output Disable/Enable Time(CL=5pF,RUP=10k)
VDD XT Pulse Generator 50 CONT VSS FOUT
RUP=10k CONT CL=5pF FOUT 0.2VDD TPLZ VOL
0.8VDD TPZL VOH
[CAUTION] The specifications on this data book are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.
2002/03/05 ( 6 / 6 )


▲Up To Search▲   

 
Price & Availability of NJU6369XC-D

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X